Pressure Sensor

Sensetek offers pressure sensor and Melt pressure sensor with excellent Stability and accuracy. This sensors comes with all stainless steel sealed construction, corrosion-resistance, various configuration of O/P, Wide temperature compensation, signal output and double output, zero and span adjustable, with OEM model optional. Available in 0 – 200, 300, 450, 500, 600 and up to 2000* bar to combined accuracy of 0.25%FS, output signal 4~20mA 0~10V and Input 24V (12~36V) DC input, overload pressure 150% FS Excitation, operating temperature 400C ~ 1250C and 4500C for melt pressure sensor, Thread Mounting.

Application: Injection molding machine, Hydraulic press, Power packs, Polyester and Nylon extortion machine, Compressor etc,.

http://www.elmec.in/pressure-sensor.html

TUBULAR HEATERS

Elmec tubular heaters are available in SS304, SS316, SS321, Inconel & Incolloy sheath.Tubular heating elements are available for various industrial & domestic applications. Every heaters are made with quality raw material like Tubes, MGO powder, Resistance wire, Terminal pins and ets,. Our heaters are specially cared by our production team to ensure for long life, Uniform heating , Energy efficient. We build every technically possible heaters as per your requirements. All our heaters are tested for High voltage test up to 2000 Volts and meger 100 Meg ohms to infinity.

Features

  • Nickel Chrome/Kanthal resistance wire
  • Immersion Heaters are available with screw plug flanges
  • Air Heaters are available with MS or SS fins
  • Tubular heating elements with additional teflon sleeving is available for heating corrosive chemicals

Click : http://www.elmec.in for more information

Hot Runner Controller

Elmec offers highly advanced and user friendly hot runner temperature controller with soft start, auto /manual, TC open and TC revers indication, heater open heater short indication and fuse fail indication. Hot runner controllers are avilable with 5 mtr. I/O card with wide choice of multi pin connectors

  • Thermocouple Calibration Accuracy : 0.10c
  • Control Accuracy : ±30c from Set point
  • Control Algorithm : PID, Auto Tuning
  • Operation Range : 30~4000c (86~752’F)
  • Power Output Range : 15Amp/Zone (3600W/Zone)
  • Standby Temperature : User selectable (30~4000c)
  • Boost Mode : 1~99min. 0~100%output
  • Sensor : Thermocouple Type J, K
  • Input Voltage : 90~250VAC, 50/60 Hz

Visit: http://www.elmec.in/

Shortwave infrared heaters from Elmec Heaters

Ceramic infrared heating elements are efficient, robust heaters which provide long wave infrared radiation. They are used in a diverse range of industrial processes such as thermoforming, paint curing, printing and drying.

visit: http://www.elmec.in to know more about about products manufactured for heaters.

Resistive Linear Position Transducers

Elmec offer wide range of #linear #displacement #transducers – linear sensors from 30mm to infinity length, works under principle of Resistive and Magnetic encoding method. This sensors are widely used in Plastic injection moulding machines, Hydraulic press, Sheet metal working machines, CNC machines and etc,. Our linear sensors, linear potentio meter are cost economic and reliable.

http://www.elmec.in/linear-displacement-sensor.html

HOT RUNNER COIL HEATERS

Elmec hot runner heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The micro coil heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.
http://www.elmec.in/hot-runner-heater.html

MANIFOLD HEATERS

Highly compressed Tubular heaters are the most advanced heating solution for injection manifolds. The square section tubular heater allows excellent heat exchange between the surfaces of heater and manifold. These heaters are installed by careful hammering on the heaters along with square section grove over the manifold and pressed to hold the heaters in position and to get good surface contact, which results in good thermal exchange and increases the heater life and reduces energy loss.http://www.elmec.in/manifold-heater.html