MANIFOLD HEATERS

Highly compressed Tubular heaters are the most advanced heating solution for injection manifolds. The square section tubular heater allows excellent heat exchange between the surfaces of heater and manifold. These heaters are installed by careful hammering on the heaters along with square section grove over the manifold and pressed to hold the heaters in position and to get good surface contact, which results in good thermal exchange and increases the heater life and reduces energy loss.

http://www.elmec.in/manifold-heater.html

Advertisements

HIGH WATT DENSITY CARTRIDGE HEATERS

Elmec High Watt Density Cartridge Heaters are manufactured with most advanced technology and quality raw materials, enables usage with high watts in small spaces and advanced manufacturing process ensures our heaters are vibration proof and thus ensures excellent reliability in heavy duty working conditions (Like Plastic Processing, Printing, Packaging and automobile industries where the heaters are subjected to heavy vibrations). The high performance is achieved by correct installation of the cartridge heaters. The perfect fitness of the heater in the hole facilitates good heat exchange between the surfaces of heater and mass to be heated thus increases the heater life and reduces energy loss.

http://www.elmec.in/catridge-heater.html

Pressure Sensor

Sensetek offers pressure sensor and Melt pressure sensor with excellent Stability and accuracy. This sensors comes with all stainless steel sealed construction, corrosion-resistance, various configuration of O/P, Wide temperature compensation, signal output and double output, zero and span adjustable, with OEM model optional. Available in 0 – 200, 300, 450, 500, 600 and up to 2000* bar to combined accuracy of 0.25%FS, output signal 4~20mA 0~10V and Input 24V (12~36V) DC input, overload pressure 150% FS Excitation, operating temperature 400C ~ 1250C and 4500C for melt pressure sensor, Thread Mounting.

Application: Injection molding machine, Hydraulic press, Power packs, Polyester and Nylon extortion machine, Compressor etc,.

http://www.elmec.in/pressure-sensor.html

Pressure Sensor

Sensetek offers pressure sensor and Melt pressure sensor with excellent Stability and accuracy. This sensors comes with all stainless steel sealed construction, corrosion-resistance, various configuration of O/P, Wide temperature compensation, signal output and double output, zero and span adjustable, with OEM model optional. Available in 0 – 200, 300, 450, 500, 600 and up to 2000* bar to combined accuracy of 0.25%FS, output signal 4~20mA 0~10V and Input 24V (12~36V) DC input, overload pressure 150% FS Excitation, operating temperature 400C ~ 1250C and 4500C for melt pressure sensor, Thread Mounting.

Application: Injection molding machine, Hydraulic press, Power packs, Polyester and Nylon extortion machine, Compressor etc,.

http://www.elmec.in/pressure-sensor.html

TUBULAR HEATERS

Elmec #tubular #heaters are available in SS304, SS316, SS321, Inconel & Incolloy sheath.Tubular heating elements are available for various industrial & domestic applications. Every heaters are made with quality raw material like Tubes, MGO powder, Resistance wire, Terminal pins and ets,. Our heaters are specially cared by our production team to ensure for long life, Uniform heating , Energy efficient. We build every technically possible heaters as per your requirements. All our heaters are tested for High voltage test up to 2000 Volts and meger 100 Meg ohms to infinity.

http://www.elmec.in/tubular-heater.html

Band Heaters

Elmec Energy saving mica Band heaters are made of Quality Nickel Chrome resistance ribbon precisely wound on specially selected Mica or Micanite sheet. It is then insulated and covered by metal sheathing and rolled uniformly to the required shape. Every heaters are made with quality raw material and specially cared by our production tem to ensure for long life, Uniform heate transfer , Energy efficient. We build every technically possible heaters as per your requirements of Holes, Terminal type , Mounting methods and special cout-outs.

http://www.elmec.in for information

TUBULAR HEATERS

Elmec tubular heaters are available in SS304, SS316, SS321, Inconel & Incolloy sheath.Tubular heating elements are available for various industrial & domestic applications. Every heaters are made with quality raw material like Tubes, MGO powder, Resistance wire, Terminal pins and ets,. Our heaters are specially cared by our production team to ensure for long life, Uniform heating , Energy efficient. We build every technically possible heaters as per your requirements. All our heaters are tested for High voltage test up to 2000 Volts and meger 100 Meg ohms to infinity.

Features

  • Nickel Chrome/Kanthal resistance wire
  • Immersion Heaters are available with screw plug flanges
  • Air Heaters are available with MS or SS fins
  • Tubular heating elements with additional teflon sleeving is available for heating corrosive chemicals

Click : http://www.elmec.in for more information